Your Bambu Lab P2S arrived fast, prints fast, and the results should be exceptional - but somewhere between the first failed layer, the AMS jam at layer 47, and the ABS print that warped off the bed for the third time, the machine stopped feeling like an upgrade and started feeling like a project. This book eliminates every one of those problems. Across 15 chapters and a full reference appendix, it walks you through the complete P2S operating system - from the first power-on to multi-material engineering prints - with the precision of someone who has already made every mistake for you. WHAT YOU WILL FIND INSIDEThe exact calibration sequence that prevents 80% of print quality failures before they happen - and why the order of those steps is not optionalA step-by-step AMS 2 Pro setup walkthrough covering single-unit installation, multi-unit daisy-chaining up to four units, and the filament loading protocol that eliminates tip-geometry jamsFlow Dynamics and Vibration Compensation calibration procedures explained at the mechanical level, so you know what you are measuring and what a good result actually looks likeComplete engineering material workflows for ABS, ASA, PA, PA-CF, PC, and PC-CF - including chamber pre-heat protocols, build plate selection, and the drying temperatures the AMS 2 Pro cannot reach aloneA filament drying reference covering every supported material with exact temperatures, durations, and the clear line between what the AMS 2 Pro handles and where an external dryer is requiredMulti-color printing from first slot assignment through flushing volume matrix configuration - including the purge volume settings that eliminate color bleed between dark and light transitionsA tiered maintenance schedule - daily, weekly, monthly, and annual - with step-by-step lubrication, cutter blade replacement, cold pull, and belt tension proceduresA structured troubleshooting framework that diagnoses first-layer failure, under-extrusion, stringing, ringing, and AMS jams by root cause rather than trial and errorRemote monitoring and AI failure detection configuration via Bambu Handy - including spaghetti detection sensitivity settings and HMS alert interpretationA full reference appendix with material settings tables, HMS error codes, calibration trigger conditions, and firmware update protocolThis book is for P2S owners - new and experienced - who want consistent, repeatable, high-quality output from a machine they fully understand. Scroll up and get the copy that turns your P2S into the machine it was built to be.